Consumer pressure for packaging recyclability works
![Consumer pressure for packaging recyclability works](https://cyetesiooa.cloudimg.io/https://www.fespa.com/getattachment/65d737c1-c60c-44be-bee4-8a7a09110cb0/photo-1575833947349-69324d765146.jpeg?width=750)
Packaging printers are under constant pressure to improve their environmental footprints. But it’s generally the brands who get it in the neck from consumer groups pressuring for change. That is likely to be the case for a while, although it isn’t necessarily a safe assumption to think printing companies are immune.
In the UK recently an environmental group managed to prevent three newspaper printing plants from getting their papers out to newsagents. The protesters’ gripe was not on the basis that printing is bad for the environment, but that the national press does not provide enough coverage of environmental concerns.
This isn’t really fair because packaging has had extensive media coverage, in print and elsewhere. There is a close correlation between the number of stories in the news and the enthusiasm of consumers to start flexing their collective muscle in many geographies. They want to improve the dismal rates of packaging recyclability and this forces brands to consider how they can redesign their packaging to be easier to recycle.
The tube used to package Pringles crisps is a case in point. Its design presents considerable difficulties for recycling. The package consists of a metal base and metal tear-off lid, plus a foil laminated cardboard sleeve and a plastic cap. This points to one of the biggest limitations for packaging design: complex packaging such as the Pringles tube is too hard to separate into its component parts, so it cannot be recycled economically. The Pringles example is an extreme one, but even for less complex packaging, balancing functionality with recyclability is tricky, to say the least.
But there are obvious things to avoid when designing a package. Plastic netting for instance is hard to recycle and can get snagged in sorting and recycling machinery. Laminates such as those used for crisp packets and chocolate should be avoided. Chocolate can be packaged in separate aluminium and paper layers without risk of degradation.
Plastic in general is obviously a no-no. Most important of all is that packaging designs include clear recycling instructions on the package. Consumer awareness of recyclability is rising and with it the desire to minimise waste packaging. This is an opportunity both for innovative packaging designers and for brands who want to reassure their customers and encourage their loyalty.
Source Information: This article was produced by the Verdigris Project, an industry initiative intended to raise awareness of print’s positive environmental impact. This weekly commentary helps printing companies keep up to date with environmental standards, and how environmentally friendly business management can help improve their bottom lines. Verdigris is supported by the following companies: Agfa Graphics, EFI, Fespa, Fujifilm, HP, Kodak, Miraclon, Ricoh, Spindrift, Splash PR, Unity Publishing and Xeikon.
Topics
Interested in joining our community?
Enquire today about joining your local FESPA Association or FESPA Direct
Recent news
![Driving Ecommerce growth in the Promotional Print Sector with Swag.com](https://cyetesiooa.cloudimg.io/https://www.fespa.com/getmedia/7077bd15-91e8-47dd-b6de-12a1200905a4/Jeremy-Parker-of-Swag.jpg?width=550)
Driving Ecommerce growth in the Promotional Print Sector with Swag.com
Jeremy Parker, former CEO of swag.com and founder of SwagSpace, shares his entrepreneurial journey and the evolution of the promotional marketplace.
![Antalis to showcase high performance colours and printable vinyl for vehicles at WrapFest 2024](https://cyetesiooa.cloudimg.io/https://www.fespa.com/getmedia/9ed02dd0-809e-41c8-927b-51d12ec0068d/VEHICLE-WRAP-(002).jpg?width=550)
Antalis to showcase high performance colours and printable vinyl for vehicles at WrapFest 2024
Antalis will showcase its range of vinyls for vehicle wrapping and its growing range of interior films for architectural and window applications at WrapFest 2024 which will take place from October 3rd to 4th at Silverstone Circuit, home to the British Grand Prix.
![How to have full control over colour management to deliver better images and low ink costs](https://cyetesiooa.cloudimg.io/https://www.fespa.com/getmedia/ca0bba10-bbdb-4d15-aa3e-73c8c7b4cdc3/Barbieri_SpectroLFPqb_PRbar_WQ.jpg?width=550)
How to have full control over colour management to deliver better images and low ink costs
Nessan Cleary shares the important factors that contribute to good colour management which includes having efficient process control and the importance of ensuring all staff follow good working practices.
![How can printers enter the short run label print market?](https://cyetesiooa.cloudimg.io/https://www.fespa.com/getmedia/fe034550-7a78-4bb8-9967-a4fa0e23738c/Aufmacher_Labels_1.jpg?width=550)
How can printers enter the short run label print market?
Sonja Angerer discusses the rise of short run label printing. The sector is estimated to reach 47 billion USD worldwide in 2024 and increase to 67 billion USD worldwide by 2028. Sonja shares how printers can enter this market and the opportunities for them.